Results 1 to 3 of 3
05-18-2011, 12:02 AM #1
Correcting and Preventing Chromatic Aberration
What is chromatic aberration?
Chromatic aberration is an optical phenomenon in which the camera lens is unable to focus the different wavelengths of light on the same plane (in this case the image sensor) in order to produce a correct image, resulting in a halo or fringe around objects.
This is especially noticeable in high contrast situations and when shooting at wide apertures. Such a situation is presented below, where the hands of a statue were shot against a bright sky, resulting in a bad case of purple fringing.
Image taken by Mike Baird
It should be noted that color fringes may also be caused by other factors such as lens flare or the camera's sensitivity to the different wavelengths of light but since chromatic aberration is the most common cause it will be the main subject of this article.
I’m no Einstein!
I should state that I am a photographer, not a physicist, so some parts of this article may not be entirely correct from a scientific point of view but I believe they're helpful constructs to understand these concepts. With that being said, let's get started.
The (somewhat) simple physics
As you might imagine, DSLR lenses are a complex piece of equipment but for the sake of simplicity, let's consider them as a single piece of glass.
When light hits the lens it is refracted, ie, it changes direction. As most people probably know just by looking at the rainbow, visible light is comprised of different wavelengths which are perceived as different colors. What happens in this situation is that the different wavelengths are bent differently by the lens, causing them to diverge (a phenomenon known as dispersion) and hit different planes, as shown in the following diagram:
This will cause the sensor to pick up "misplaced" colors at certain spots, resulting in the familiar chromatic aberrations.
Go to the corner!
Chromatic aberration is usually more or less controlled in the center of the frame. It’s at the image corners that it is more troublesome.
Camera lenses and chromatic aberrations
In order to correct this problem, lens makers came up with ways to minimize the divergence of light waves. The cheapest solution is usually used in consumer level optics like the common 18-55mm kit lenses and is known as an achromatic lens design. It uses a second lens that has a different dispersion than the main lens and tries to converge the light rays in order to try to correct both spherical and chromatic aberrations that light suffers when passing through the first lens. However, this isn't a perfect process and small imperfections are still present.
A simplified diagram demonstrating how achromatic lenses work
What is used in higher end lenses is an apochromatic lens design, in which a third element is added, correcting even further the aberrations.
A simplified diagram demonstrating how apochromatic lenses work
In addition to this design, lenses like the Canon EF 70-200mm F2.8L IS (and all other L lenses, for that matter) contain super-low dispersion glass, which as the name implies, doesn't disperse the different wavelengths as much, minimizing this problem. Because low dispersion materials like fluorite are usually used, the final lens cost is driven up quite a bit, which partly explains why they cost so much in the first place.
How to avoid it on the field
Avoid high contrast situations
This might seem like a no-brainer but it really helps to downplay the optic design imperfections, especially if using consumer level lenses like most of us do. Common suspects include fences, tree branches and shooting a subject against a bright sunny sky.
Stop down your aperture
While it is very tempting to use a wide aperture to get nice bokeh, if you get some fringing try to stop down the aperture at least one stop. This will greatly help minimize the visible aberrations.
Avoid the extremes of your zoom lens
Not only in life but also in photographic lenses it is said that virtue is in the middle. Zoom lenses usually perform better when using its middle focal lengths. For example, when using a 70-200mm zoom, shooting at 135mm will usually wield better results than at 200mm.
Avoid super zoom lenses
Unless you don't want to carry extra weight, like when going on vacations, avoid super zooms at all costs. They have terrible chromatic aberrations on the wide end. Alternatively, get some prime lenses, as they are generally optimized to reduce these optical artifacts and are relatively cheaper and lighter.
How to correct it in Photoshop
After opening your image in Photoshop, go to Filter -> Distort -> Lens Correction…
On the right side panel you should find a set of controls named Chromatic Aberration.
Depending on your image, you should try to correct the fringing in the best way you can by adjusting the sliders. To do this in an optimal way make sure you are viewing the image at a magnification of 100% or more.
You might have to move only one or both sliders: it all depends on the image you’re dealing with. In this case, I had to move both.
Moving the Fix Red/Cyan Fringe slider to the left will correct red fringes, while sliding to the right will conversely correct the cyan fringes. The Fix Blue/Yellow Fringe slider works in a similar fashion.
Don’t crop just yet!
If you recall from earlier on, chromatic aberration is more prevalent on corners. Photoshop’s algorithm takes this into account so make sure you are editing the image in its original aspect ratio or else you’ll get weird results in some areas of the image. Correct first the aberrations and you can always crop later.
The Before and After Using Photoshop
I trust cigratte more than a girl.
It will damage my lungs but will never break my heart ;-)
07-25-2011, 09:52 AM #2
- Join Date
- Jul 2011
07-26-2011, 12:16 PM #3
ThanX 4 Sharing......!!
Deer Kha ...............!!
Ise Hi Umda Sharing Karna..................